พารากอนตัวกรองน้ำเคาน์เตอร์ PW6300

1. Water Purification
Process

Raw water → Polypropylene
fiber mat→KDF55→Polypropylene fiber mat→ Granular Activated Carbon→ Melt-blown filter→ Purified Water

 

2.
The Scope of Application of Water:

Municipal water.

 

3. Technical Parameters

Water Flow: 0.5gpm (1.9 l/m)

Capacity: 30,000 gallons

Working Pressure: 0.1～0.35MPa

Operating Temperature: 4℃/40℉-38℃/100℉

 

4. Installation Steps

u
Remove aerator from faucet.

u
Replace with diverter valve. Tighten top
collar with pliers to ensure leak-free seal. Note: If the diverter valve does
not fit your faucet, please use the supplied adapter and washer or obtain the
proper adapter at your local hardware store. If diverter valve leaks just below
upper rotating collar, replace existing washer with supplied washer, or obtain
a thicker washer from your local hardware store or contact Paragon Water for
assistance.

u
Push double O-ring end of spout into hole in
the top of the filter housing. Turn spout so it is over sink.

u
Turn on cold water at the faucet.

u
Turn bypass control on diverter valve.

u
Run water through unit for 30 minutes to
purge entrapped air and carbon fines from the unit.

u
Toggle the bypass control to select filtered
or non-filtered water..