AZZA Fan Case 140mm Rainbow RGB with B4P Molex & 3Pin Reset Sync

AZZA Fan Case 140mm Rainbow RGB with B4P (Molex)
& 3Pin Reset Sync ·        
14cm. Rainbow RGB Fan.·        
Sync Cooling Fan color
with 3Pin Sync.·        
Control Rainbow RGB
Lighting with the PC Reset Button.  General Specification      Model No.                          DF1402512SELNDimensions                        140*140*25mmRated Voltage                    DC
12 VOperation Voltage Range  10.8 – 13.2 VStarting Voltage                 DC 5 V MAXRated Current                    0.16
A +10% MAXLocked Current                  0.15
A +10% MAXPower Consumption           1.8 W +10% MAXSpeed                                900
+10% R.P.M.Max Airflow                        56.26
CFM (ft3/min)Max Static Pressure           0.58mm-H2ONoise Level                        17.66dB(A)Lift                                      30,000/hrs
25CNo. of Blade                       9No. of Pole                         4Electrical Specification   Locked Rotor Protection    Circuit is protected after at rate voltage for 2 hoursPolarity Protection              Circuit is protected when VCC & GND are exchangedInsulation Resistance         10M b/w unshielded wire and frame at 600VDC/minDielectric Strength              0.05mA MAX Measured b/w lead wire (+) and frame at 500
VAC/minMaterials Specification   Plastic Material                   PBTBlade housing                    PCStator core                         Stainless
steel (SUS420J2)Bearing                              Sleeve
BearingRubber magnet                  Strontium
ferrite (BQB14W)Silicon steel strip                H23Enamelled copper wires     MW-2UEW Print
Circuit Board             Single Layer
BoardLead Wire                          UL1007#26AWG
Length: 570 +10mm / Length: 500 +10mmConnector housing             Molex B4P & 3P + RESET-3PLabel                                  PolyesterLED                                    5050
8Pin RGB Function SYNC Guide           A.   
3 Pin Port connects RESET Button wire of computer case Switch
around light modes with RESET ButtonB.   
4 Pin Molex connects with Power SupplyC.   
3 Pin Ports (Light Sync Wire) connect between cooling fans (Male
& Female Port pairing) To Sync colors & modes between cooling fan. Warning         1.   
When RESET Button are connected with cooling fans, will result in
loss of reset function  #AZZA#Fan#Case#140mm#Rainbow#RGB#3Pin#SYNC#Reset