3M 39173 Car headlight coating And clear lens wipes. Headlight Clear Coat+The surface protection film with wrinkled tape size 550 mm. X25 meters.

Benefits to coat the car headlights, protect the headlights from UV rays, prevent the headlights, headlights, yellow, gloomy, how to prepare the surface before using to clean the headlight surface with a clean fabric or 3M microfiber and use water ingredients with coughing. Alcohol surface With a ratio 1: 1 protecting the area around The headlight with Masking Tape 3M tape, avoiding the bridge, the color peeling or color that is easy to come off, spray the water on the green side of the sandpaper number 3000. Make sure that the headlights before the coating must be confident that the pieces must be confident. The work is thorough to the end of the sandpaper polishing process. By observing from the surface of the headlights must be consistent Which will be a gloomy skin, for a car with a yellow surface or a lot of marks The surface should be prepared with 3M headlights before coating the product. How to use: Suggestion: Caution: Use of a car headlights made of plastic only if the product is exposed to a non -car headlight area. Such as the edge of the headlights, wipe off with a clean dryer immediately, must leave the drying time of the product for 1 hour before urgent delivery of the car or drive in rainy conditions and must follow the methods. Use as recommended by the company 3M and 3M company will not be responsible for damage caused by the product used before the 3M product.