3M car repair kit and headlights With rough sponge, sandpaper 800,1000,3000, 3 inches, a drill or screw M16 + rough polishing solution, removal solution 3917x2

Car polishing product or headlights and end Designed for removing car paint And general yellow stains Easy to use 4 steps Used with ordinary drills around 1200-1600 rounds, helping to save time And expenses, which can be done by yourself, consisting of sandpaper number 800, 5 sheets (number 800, applied to the front lamp in case of polishing the car, start at the number 1000 first) Sandpaper, Tri Sand number 1000, 1 sheet, number 3000, 1 sheet, sponge, 3 "(for the core of the drill or spiral in 16 mm), removal solution for 1 bottle of 8oz, rough water 3 "1 M 1 sheet. How to use *** Number 800, use with the front lamp in case of the car color, start at the number. 1000 before **** 1. For plastic lamps Put the keyboard and drill. Use sandpaper number 800 before scrubbing-middle to remove yellow stains and various marks. When scrubbing the paper out of the sheet Close the drill Then change to a new sheet Continue to run out of various marks. 2. Next, use sandpaper number 1000 to remove various marks. From step 2, polished-middle Always injected with water (Cannot be scrubbed) not too much After this step, the fire should be whiter *** for polishing to start at the number 1000 or 3000 depending on the depth of the marks. 3. Use sandpaper, three000 numbers, sprayed with water. (Can not be scrubbed) lightly-the middle is continuous, then wipe with a microfiber cloth Check the work if there are still marks. Repeat 4. scrubbed with polished drugs and coarse sponge To remove the marks Then wipe, followed by a microfiber cloth