ITC Audio: T -S01 By Millionhead With the options of Balance microphone and not many balanced and single -channel output)

Pre -amplifier with multiple balanced and unbalanced microphone input options and Single Channel Output. Premons 10 Ch inputs and 2 Ch Output, just 1 U, weight 4.28 kilograms, with options, inforption, microphone. Balance and not many balances and one -channel output A audio signal with 10 channels for 1 microphone remote control and the channel for microphone or LINE channel (with 9 slots). There is an inbound channel 1 for the microphone remote. Inbound channels at 2-10 terminals are XLR (Mike: Balance, Line: Anblanz). Inbound channel 2-4 has a Phantom Power for use with condenser microphones. And when used The audio signal of the inbound channel 5-10 will be automatically reduced. Inbound channels at 7-10 terminals are XLR (for Mike) and RCA (for LINE). There are 2 outbound spaces. The connector is XLR, 200 ohm, balanced with a volume adjustment button. Independent The channel for taking the signal to record 1 channel (RCA). The connector is RCA, 10 kilograms. There is a warning sound before the announcement (Chime) with a button to use in front of the machine and the remote control point behind the machine. Use the case of a distance from a distance. Inbound channels 1-10 and Chime channels have each channel to select the signal to be released at Channel 1, 2, and 1+2 and have a switch to choose a mic/line. With an independent volume adjustment button There is a button to adjust the bass and the freedom. Of each outbound The frequency response area of ​​20-20,000 Hert (- 1 DB), distorted value of less than 0.05% (Mike), the sound signal ratio to noise of more than 60 DB (Mike), 75 DB (LINE) value. Cross-Talk, more than 60 DB (Mike), 75 DB (LINE) with the performance of each channel. And show the outbound signal level It is a type of installation in a 19 -inch standard audio cabinet, using 220 volts AC voltage, 50/60 Hurt and 24 VC 10 Channel Audio Mixer, One Channel for Microphone Remote and One Channel for Microphone or Line Channel ( with 9 switches). Inputs 2-10: Connectors are XLR (MIC: Balanced, Line: Unbalanced). Inputs 2-4 Have Power Power for use with condenser microphones. Automatically Reduced. Input Channels 7-10, The Connectors Are XLR (For MIC) and RCA (For Line) Independently Selectd for use. Rom Each Other Channel for Bringing The Signal To Record 1 Channel (Rec Out) Connector is RCA, 10 KILO OHMS, Unbalanced. Point Behind the Machine. Use in the Case of Remote Work Inputs 1-10 and Chime Channels, Each with a selector switch to output channels 1, and 1+2, and a mic/Line selector Switch. Are Independent Bass and Treble Adjustment Knobs. Of Each Output Channel Frequency Response 20-20,000 HZ (- 1 DB) Distortion Les Than 0.05% (MIC) Signal to Noise RATIO GREATER TH 60 DB (MIC) Values ​​Values ​​Values -TALK Over 60 DB (MIC), 75 DB (Line) with Status Indicators for Each Channel. And Shows the Output Signal Level It is a Type that is Installed in A Standard 19 inch Audio Cabinet. , 50/60 Hz and 24 Volts DC.Features; 2 Channel Mixer of 10 Inputsremote Paging Console T-319 AS MIC 1 with Highst Input Prioritymit 2-4 With Vox Selector Overputs 5-10 and Phantom Powers Wits Witch, MIC, Line and High pass filtering selectorinputs 7-10 EITHER by XLR MIC INPUTS OR BY DUAL RCA LINE INNEL Channel XLR LINE Outputsall InClude Inputs1-10, MIC PAGING CONSOL TOLE19) Channel 2 And Channel 1+2 outputs.built-in 2/4 Tone Pre-SET Chime, Remote Chime Trigger and Local Trigger on Front Panelvolume Controls Are Pro Provedd Over Chime, Mic1, Inputs 2-10, Channel 2 Masters. TREBLE TONE Control Are Provided for Both Channel 1 and Channel 2.indicators for Input 1-10, Power and 2 Channel Level MERSAC 110 OR 230V and DC 24V OPETION