JWKG Dash Cam Universal Car DVR for Toyota / Chevrolet / Ford / Nissan / KIA / Hyundai. Control corner by two camera apps.

Caration:
if The Car Battery Voltage is Lower Than 11.8V, The Voltage Protection Device Will Cut Off The Current. Canfit 80% of Cars with Auto-Dimming Rearview Mirrors Or Auto-Sensing Wipers,
Support Adjusting The Camera Angle (Up or Down) to Choose The Best Angle for Your Car,
Removables Uninstall.mobile Phone Download App, Mobile Phone Link Machine Wifi, You Can Browse The Record Video Online, Download and Watch More ConvenientSingle Camera 1296P Video, Dual Camera (FRONT + RER) 1020P Video, HD VID VID VIDE Sony imx323 1 / 2.9 CMOS Sensor, 140 Degrees, F1.8, 4G Glass Camera, Night Vision is ALSO CLEAR. Press to Lock/Unlock Files, Long Press to Turn on/Off> Camera Button: Short Press to Start/Stop Recording, Long Press for 3 Seconds to Take a Photo
Microphone: After The Microphone is to On, There is Sound in the Recordd Video
Indicator Light: When Wifi is off, The Blue Light in Standby Mode is off and the red light is always on; The Red Light in Video Mode Flaashes. When Wifi is on, The Red Light and Blue Light in Standby Mode Are Always on; When Wifi is on, The Blue Light is Always on in Recording Mode and the Red Light is Blinking; When Wifi is on and the Mobile Phone App is Connected, The Red Light is Always on and Blue Light is Blinking in Standby Mode; Video Mode Red Light and Blue Light Flash Alternately
Reset Button: Restart The Device When Power Is OndashCam Installation1.Follow The Manual of Your Car Or Search The Information ool (if you have to use it) .2.use the Electro Probe, Find the Acc Power Fuse and Constant Power Fuse, Were Commnd You Use Reading Lamps, Tail Lams, Turn Signals, Power Windows FOPPPLUSE ( The Are Constant Power Fuse .ACC POWER: WHEN You Plug Your Car Key Theen Turn It To ACC, The Power will Work. In Your Car Key to Lock or Unpluck Or Unpluck or Power will off. ACC) with The ACC Power Fuse .Constant Power (Batt +12 V): Plug or Unluang Your Car Key, The Power is Uninterrupted .Connect theelle Wire (B +) With the consume. Cut The Wires, Refit Them Them Them Them Temple The Carfuses .THEN PLUG THE FUSE THE IS .The Gnd Wire (Black) To Connect IT STEELLPLER Key to ACC, Test The Car Dvrcan Work or NCONNECT your Car DVR VIA WIFI, Open The FinalCam to Manipulate The Car Dvr and Find The Best Install Position. ,then fix the wires ,finish theinstallation , feel at ease to useHow to use APP?After ensuring that the recorder is powered on, turn on the wireless LAN on the phone or tablet, and find the network "WIFI_DVR_XXXX (serial code)" corresponding to the record. The Default Password is 1234567890.after The WiFi Connection is Successful, Click The Installed App to Enter The App Main Interface, Click "Camera" To Enter The App RECORDING Interface, The Setting Interface