MIC DC / DV microphone, only with 3.5 mm sound plug, compatible with Canon Nikon Digital Camera & Video Camcorder.

Stereo Mic DC/DV Dedicated Microphone PL-MIC02
With 3.5mm Audio Plug for Canon Nikon Digital Camera & Video Camcorder
Features: 1. The Microphone Can Be Used with Digital Cameras & Video CamcordSh 3.5mm Mic Jack, and Can Be Used with The Following Cameras by Hot Shoe Directly: Canon EOS 1DX III / 1D Mark II / 5D Mark IV / 5D Mark IV III, 90D / 80D / 70D / 800D / 750D / 700D; R6 / r5 / r1 / r / rp; Nikon D6 / D5 / D4S, D850 / D810 / D800 / D750 / D7200 / D5500 / D5300 / D3500 / D3300; Z7 II / Z7 / Z6 II / Z6 / Z5 / Z50; Sony A9 II / A9 / A7 IV / A7 III / A7S III / A7R III / A6600 / A6500 / A6400.


The STEREO Microphone Uses Two Stereo Electretor Pickups, Two Separate Signal Amplification Circuits, and Acoustic interference Tube Technology, Have Good Sensitivity and High Directivity Rectivity Can Easily Be Obteined.

3 . The Stereo Mic Uses Multi-Level Signal Amplification Circuit and Noise Reduction Circuit, The Output Impedance of 500 Ohms, Suitable for Most Cameras and Camcorders; Providing Low-Cut and Sensitivity Enhancements to Meet the Requirements of Different OccASIONS; Low-Cut Can Effectively Reduce Wind Noise.

Using One AA Battery, with Excellent Standby Time, WHILE Providing A Low Voltage LED Alerts; Metal Materials Cavity, Not Only Lightweight, Rugged, But also conduct to High-Frequency Sound Filtering of Electromagnetic Waves and Enhancement of High Frequency Sounds.

5. Unique Removable Rubber Buffers Can Effectively Reduce The Noise Caused by Vibration, Providing ± 30 ° Tilt Adjustment; Using a Large Large Lock Nut with Built-in 1/4 "Copper Nut; High-Density Sponge, WEVED SIGNAL CABLE CABLE CABLE CABLE CADIO OUTPUT PLUG, CAN EFFEFELY REUNDUCE SLUCEN NOISION: 1. Cut Design to Reduce Wind Noise Outdoors, But May Reduce Low Frequency Sound Effects As Well;
2. WHENSITIVITCOT TO +10 DB, IT Will Enhance The Sound Effects BR>
3. When Recording, Please Do Not Operate The Switch or Touch The Microphone, Do NOT MOVE IT VIGORUSLY, OTHERWISE, The Noise Will Be Record;

Vertical to the Ground to Ensure Pickup Heart-Shaped for Better Sound Effects;

5. Whene and Storage, Please Be Careful to Avoid Wet, Electrostatic, Magnetic, Hot Or Cild, Which Life of the Life of the Life of the Life of the Life of the Life of the Life of the Life of the Life of the Life of Product and the USE Effect. 2. Install The Microphone Back to the Shock Absorber, Attach to the Camera Hot Shoe and Adjust The Microphone Length According to the Length of the Lens;

3. Insert the Plug Properly Into Mic Hole of Camera or DV;

4. Turn on the Microphone First, and the Camera / DV Power, Set in Video Mode to Start Work;

5. When Recording, Keep The Microphone Switch Vertical to the Ground, Do Not Adjust the Switch During Working;

6. After the Power, Remove The Battery, Store the Microphone in a Dry Place Under Room Temperature. >
Sensitivity: -45DB

Enhance: +10 DB

Low-Cut Frequency: 60Hz 10DB (OTC)

Output Impedance: 500ω (at 1khz) < BR>
SNR: 76DB

Maximum Load SPL: 120DB

Battery Type: AA Battery

Cable Length: 33cm

PLUG: Gold- Ported 3.5mm in Diameter

Dimensions (Excludeing Sponge): 200 x 42 x 65mm

Weight: About 120g
Package Including: 1 x Ishoot DC/DV Stereo Microphone PLOPON BR>
(The OTHER ITEMS in the Photos Not list