Optimal Audio: Smartamp 10 By Millionhead (Amberi Amplifier provides a maximum power at 125 watts with Integral DSP).

2 x 125W Amplifier with Integral DSP Amplifier to a maximum power at 125 watts per 4ω-16ω ohm and 70V-1 volt. The frequency area is between 20 Hz-8KHz. Integral DSP helps to increase the efficiency of the appropriate work. Smartamp 10 is an amplifier with business in digital signal processing (DSP) SPECIFITLORDATILORED TOMISE The Performance of the Optimal Audio Loudspeaker. Drive Both Conventional Low Impedance and 70V -100V LoudSpeaker Loads. Internal DSP Presets of Optimal Audio Loudspeakers are selected by Switches to the Rear of the Amplifier, WHICH EQ and Overload Protshings. ACK Housing Enables Two Units to BE MOUNTED SIDE BY SIDE BEITH AMARTAMP 10 Or Smartamp 20 Al -Wing up to 6 Channels in A 1u Space. The Smartamp 10 is Capable of a Maximum of 250w Output Shared Between The Two Channels. UID for Each channel depending on the system requirement. For Example, if Channel One was to Only Be Using 20w of Power for Some Up Speakers, Channel Two Could Delver The Remaining 230w of Power for a More Demanding Application. Ogy Enables Universal AC Mains Operation, Eliminating The Need for Local Market Specific Power Reggitation and Potential Reliability Issues. The Power Supply Delivers Consort, Regulated Power Worldwide Withra Low. Star compliance. For Optimal Audio Loudspeakers125 Watts Per. 4ω-16ω and 70V-00V LOOE LOUDSPEAKER LOADSPOWER SHARINGY Enables 250 Watts from A Single Channel Mains, PFC and En