Review of empty case, RGB, Clear GVIEW I5-50 lid, black with multi-purpose controller Press 1 order at a time.

Specifications.
This GVIEW case has 4 RGB fans and installing the GVIEW RGB power controllers in the case. Therefore has a patent (Patent patent number patent No.201920776307.9)
GVIEW brand power controller is a RGB light control device for all devices in the computer with RGB lights, as well as other computer accessories such as
* RGB fan * LED line * Sync CPU RGB * RGB Sink CPU fan * RGB CPU water set * RGB CPU Water Fan RGB * Sink RAM RAM. Ask the RGB power connector to be 3PIN (A-RGB Rainbow).
According to the picture below. can To allow your computer to play the RGB light. Of GVIEW, easy to change the light, use only one reset button on the computer One button can be done in many functions. Play automatic power through the Reset button on a single computer. The most common problem is that the remote is lost or the remote is not found.
or soft charcoal. Because the general RGB power controllers are separated into 2 private and the remote control must be used in 2 parts together. The chance of remote is lost or broken.
GVIEW's RGB power controller uses a series to wiring in a beautiful case. Hide the wires along the edge and corner of the case.
The RGB power controller in the market uses parallel methods (parallel). All lines must approach the control box. Therefore there is a problem with the fan line like a spider mesh, unattractive, not neat. Long) x 3mm (thick) as small as the tip of the little finger Compared to about 1 in 80 of the general brand, so small that it cannot be controlled as a controller. Must find a screw seizure, may not make it look neat. The same rhythm of the same runs easily, just press the reset button. Only one button is out of the general model. Who is the brand fan brand? Cannot be used together And cannot connect other types of computer accessories.
For example, the brand controller, brand A can not control the fan brand B and cannot control the RGB light or sync CPU. If the fan is broken or the controller, it must be lifted.
Another problem is often encountered in the computer that is decorated with RGB and found the fan out of the color. Another RAM The water set or sync CPU is another color on the computer. There are many colors and multiple strokes.
Can not adjust at the same time. Adjust the color of the RGB color, must adjust the control of anyone. Some devices, adjust the wireless remote control Some have to open the case to press the
button on that device controller. Because each controller, but their own products cannot control other products, making it inconvenient to adjust the RGB color. G VIVE's RGB power controller. The device is the same color. The same color rhythm of the GVIEW RGB power controlle is a professional product.
And new card players without experience can be done.
How to use below.

RGB power controller GVIEW will use the method of reset on the computer or the RGB button (if any) because the reset button today almost does not use anything.
Can be used with the power button. Pin Reset from the Mainboard to the GVIEW RGB power controller can control the RGB lights completely. Such as
turn off the lights Change of fire mode For example,
various functions are as follows:
1. Turn off the light: soak the button, press the reset until the LED lights turn off by itself. Change LED (Effect): Press 1 reset button is to select 1 color mode. Press 1 time will move 1 mode. Press continuously. Once 30 mode, start from the #1 mode as usual.
When we have the mode that we like The controller will remember this latest mode. (Even closing the computer, still remember). Next time, use the computer. No need to adjust again and easily observe. #1 will be a rainbow mode 30 colors.
As shown in the table below.
4. For the controller to play automatically (Autorun): When we want the RGB light controller to play ourselves, all 30 modes can be pressed to soak the reset button until the power goes out and press the reset button until the lights on their own. RGB will automatically play by yourself, taking about 200 seconds per 30 modes. A) is in the process of automatically playing by ourselves when we find the mode that we want. If you want to stop at this mode Can do as follows: Press the reset button until the machine is off. And press again to re -open, it will be at the mode that we have already chosen. B) is in the automatic play mode. When pressing the reset button 1 time, the device will return to the #1 (rainbow) and end the mode. Automatic play. 5. Remember the selected mode: GVIEW RGB power controller can remember the latest LED mode that we use. No need to adjust the color mode every time the computer is turned on: Gview I5-50
Product Code: G153CN0187
Supports the motherboard size: ATX/MATX/Mini-ITX.
Power Supply Place: Below
Number of channels DVD: -
Points that can only be worn. HDD: 0
The point can only be worn. SSD: 0
Points can be worn. 2 types, both HDD and SSD: 2
A-RGB Fan Fan, Rainbow: 3 Rainbow A-RGB fans. 2 rainbow (optional) "
Fan, A-RGB fan like rainbow: 1 rainbow A-RGB fan. That is installed with a 12 cm fan at the PSU barrier: "3 Rainbow A-RGB fans (Optional)"
The water set size that can be worn in front: 360 mm. 240 mm
Supported Aircooler height: 160 mm
GPU length that can support maximum: 370 mm.
Left lid type and measurement: Tempered Glass
Lid type Right side and raw material: steel
Mask and raw materials: -
Type upper lid and raw materials: steel
storage on the left:
USB2.0: 2
USB3.0 : 1
Card Reader: -
Structure (D x W x H): 396 x 205 x 480 mm
Mask structure (D x W x H): 405 x 210 x 510 mm
Box (D x W x H): 560 x 280 x 535 mm
Net weight KG: 5.7
Total KG boxes: 7
Guaranteed guarantee:
Guaranteed duration : 2 years.
Guaranteed conditions: 2 years of rusting structure, LED lamp switch, USB port and fan 2 years.