SparePart Duble Hose Connection, 1 pair of pump lines

PLENTITUDE (double pump) for 2 side pumps. SparePart Duble Hose Connection (Double Pump) 1 line
Service life 6-12 months.
How to use a double pump, also known as the pump In the case of wanting to pump two breasts at the same time Can use a double pump cable to connect to the top set of equipment (back back). The other side with joints (white) for plugged into the machine to drain the milk on both sides at the same time.
Care treat Should not bring the breast pump Absolutely to wash or wash the water Recommend if you want to clean, use wet cloth, wipe off -road, is enough. To bring the breast pump Continue with the lid, which has a position out. For breast pump strap Pushing a single type of pump or double pump type At the point of standing out Then push the cable down to the end Bring the device into the breast and start using the machine.
Techniques for assembling equipment
The device has a video, but for good and effective use. Every part is completely tight. And before bringing the equipment to assemble The device must be dry and in a complete condition. Ready to use.
Another suggestion The life of each device is different. The integrity of the equipment is very important because the device is not guaranteed. Mother must buy to reserve. In order to use Can buy separately No need to buy the whole set.
Tips for assembling equipment Complete all parts Lock and tight.
The brand would like to recommend as this.
1. The joint of the silicone valve to assemble the pipe side (for release milk into the bottle).

Add silicone to the top of the joints. Use your fingers to swipe the edge every time to allow the device to lock
3. Use the lid to turn back. Let the legs of the device alternate and press down. Turn clockwise To the opposite cable plug in the cone
4. Choose plastic cone To suit the mother's nipple size And add 3D silicone cones in front of the cone.
5. Put the double lock at the inner joint and use your fingers. Click to lock
6. Put the bottle to store milk.
That's it. The device can be used well. And effective.
Problems that new mothers ask often. What is the reason?
1. The integrity of the device There may be floating injecting. Or have milk stains attached.
2. If the equipment is checked, the device is in perfect condition. See the assembly above whether the assembly is not tight or not.
3. Check the cable for breast pump. Is there a floating fold?
As well as checking that the device has a drop Can use various joints Above the check as well.

Caution
1. Equipment before washing Remove all parts.
2. Should be cleaned every time after use.
3. Should not bring boiled equipment in boiling water.
4. Silicone devices recommend boiling hot water.