SpareParts Silicone Breast Shield 3D Silicone 1 Piece

The brand PLINETUDEDE SPAREPARTS SILICONE BREAST SHIELD (3D Silicone Silicone) 1 Silicone 3D Soft Silicone Concise Soft Size Size has 2 sizes: 24,27 mm and 30 mm. The 3D base is BPA Free. Free from a 100 % silicone cone cancer. Add a soft touch. More bond

Service life 6-12 months
How to use Used to close the front of the plastic cone to increase the touch that is more soft and attached to the breast while pumping the milk by putting into the plastic pipe (when wearing 3D silicone cones will make the size of the pipe more rolled 1-2 Size). Once the device is assembled, bring the cone part to the breast area to the head in the middle of the pipe. Just this, the mother is more comfortable to pump milk.
Note: Recommend to measure the diameter of the nipples- nipple size 1.3-1.7
Mills should use 24 mm cones- 1.8-2.0 mm nipple size should use 27 mm cones- more than 2.1 millimeters of nipples. The cones should be used for 30 mm. The shape may be suitable for Some mothers, mothers who pump the milk, recommend the temple after the pump is finished immediately. When the nipples are the most expanded Will choose the cone of the most work- the mother has not given birth to a temple after 35 weeks for the nipples to expand first Or waiting for birth to be more fit- choosing a cone is a basic introduction Choosing a cone depends on the shape of the nipples. Mother+personal preference.
Techniques for assembling
Equipment has a video, but for good and effective use, mothers should assemble the device. Every part is completely tight. And before bringing the equipment to assemble The device must be dry and in a complete condition. Ready to use.
Another suggestion The life of each device is different. The integrity of the equipment is very important because the device is not guaranteed. Mother must buy to reserve. In order to use Can buy separately No need to buy the whole set.
Tips for assembling equipment Complete all parts Lock and tight.
The brand would like to recommend as this.
1. The joint of the silicone valve to assemble the pipe side (for release milk into the bottle).

Add silicone to the top of the joints. Use your fingers to swipe the edge every time to allow the device to lock
3. Use the lid to turn back. Let the legs of the device alternate and press down. Turn clockwise To the opposite cable plug in the cone
4. Choose plastic cone To suit the mother's nipple size And add 3D silicone cones in front of the cone.
5. Put the double lock at the inner joint and use your fingers. Click to lock
6. Put the bottle to store milk.
That's it. The device can be used well. And effective.
Problems that new mothers ask often. What is the reason?
1. The integrity of the device There may be floating injecting. Or have milk stains attached.
2. If the equipment is checked, the device is in perfect condition. See the assembly above whether the assembly is not tight or not.
3. Check the cable for breast pump. Is there a floating fold?
As well as checking that the device has a drop Can use various joints Above the check as well.

Caution
1. Equipment before washing Remove all parts.
2. Should be cleaned every time after use.
3. Should not bring boiled equipment in boiling water.
4. Silicone devices recommend boiling hot water.