Sparserart Gas Storage Cover, 1 piece.

1 PLENTITUDE SPARERART GAS STORAGE COVER (back cover) is 1 piece of plastic. The whole piece BPA Free is free from cancer. The work is closed on the silicone. Go back in the top part of the device to lock the silicone together to attach to the richest joints to prevent milk flowing back into the machine after adding silicone. Then put the lid back and turn off the top, with the fangs of the joints alternately and then use the hand to press down and turn the clockwise to lock If you want to remove, turn the clockwise and pull it up.
Caution. The device must be completely connected because it is a vacuum system. It must be completely assembled every time before use.
Methods of maintenance can be washed, baking, not more than 120 degrees, should avoid one UV baking machine. Because it may reduce the service life of the device
Techniques for assembling equipment
The device has a video, but for good and effective use. Every part is completely tight. And before bringing the equipment to assemble The device must be dry and in a complete condition. Ready to use.
Another suggestion The life of each device is different. The integrity of the equipment is very important because the device is not guaranteed. Mother must buy to reserve. In order to use Can buy separately No need to buy the whole set.
Tips for assembling equipment Complete all parts Lock and tight.
The brand would like to recommend as this.
1. The joint of the silicone valve to assemble the pipe side (for release milk into the bottle).

Add silicone to the top of the joints. Use your fingers to swipe the edge every time to allow the device to lock
3. Use the lid to turn back. Let the legs of the device alternate and press down. Turn clockwise To the opposite cable plug in the cone
4. Choose plastic cone To suit the mother's nipple size And add 3D silicone cones in front of the cone.
5. Put the double lock at the inner joint and use your fingers. Click to lock
6. Put the bottle to store milk.
That's it. The device can be used well. And effective.
Problems that new mothers ask often. What is the reason?
1. The integrity of the device There may be floating injecting. Or have milk stains attached.
2. If the equipment is checked, the device is in perfect condition. See the assembly above whether the assembly is not tight or not.
3. Check the cable for breast pump. Is there a floating fold?
As well as checking that the device has a drop Can use various joints Above the check as well.

Caution
1. Equipment before washing Remove all parts.
2. Should be cleaned every time after use.
3. Should not bring boiled equipment in boiling water.
4. Silicone devices recommend boiling hot water.