Spray PU FOM 750 ml. Sumo, multi -purpose spray Spray, leak, spray, waterproof, spray, spray, foam, PU FOAM, resistant to all weather conditions, firm texture

750 Sumospray PU FOAM MODEL 750 Sumo Sumo

Multipurpose spray, leakage, waterproofing, spraying to fill the large hole in the joints, along the various traces between the window, window or rail. wire Hot roof injection Fill up, cracks, walls, cracks, lanterns, air pipes, floating buoys, use at home, cracked, just spray the spray to wait for a dry foam, use a cutter to cut the PU Foam Seal Leaks, Waterproof Use to Spray to Fill Holes Large. Vulnerabilities in Various Joints Between Frames, Doors, Windows or Wireway, Roof, Walls, Mortar Crab As The foam is 17-22kg/m3 density, allowing 100%divide.- Foam texture is not bubble. Can expand a lot. - It is insulation. - Cold resistance, water, not water, oil resistance, acid resistant to all weather conditions - 750ml cans. Can be used up to 3.5 square meters. Or about 350 meters in a straight line at the thickness. 2 Central centimeters




Suitable for multi -purpose spray Used to spray for Udon Large vulnerabilities follow in the joints between the frogs, doors, windows or wires, hot roof injections, fill the wall cracks, cracks, cement and air pipes and float buoys. For example.


Suitable FOAM USE TO FILL HOLES LARGE VULNERABILITIES in Various Joint Joint BetWeen Frames, Doors, Windows or Wireway, Walls, Mortar Cracks Heat insulation, leak, fill, or fill for various pipes, heat waterproofing, fill the edge of the roof wall. Cracks. Insulation, Leakage, Stopping or Filling for Various Pipes, Waterproofing, Heat Insulation, Filling The Edge of the Pipe On the Roof Wall.

The edge of the door Fixed Adhesive Filling, Heat Preservation and Waterproof for Various doors and Window Frames. Cans while injecting- used to inject PU FOM Follow the cracks of various walls And wait for the body to be about 15 minutes.- Can use the cutter to decorate along the marks to the normal work after 15 minutes.- Can be painted over the injection. The injector with acetone or thinner



- Put the Injection Tube Into The Can.- Shaking The Can up and down 30-50 Times.- UPSIDE DOWN PHILE Injecting.-USE PU FOAM Injection to Fill the Gap, According to the Cracus of Various Wall Surfaces and Wait for About 15 Minutes.-Can Use The Cutter to Decorative After Injection.-Can Be Painted After 1 Day.-IFD, Wash The NOAT THE THE THE THE THE THE THE THE THE THE THE THE THE THE THE The With acetone or thinner.
How to clean the injection tube 1. Can immediately press and press the water out, as if to stop using To chase the wind out of the tube 2. Leave for a moment to make the solids. And remove the length material, push the solution out of the tube and nozzle 3. The head of the gun, use steel wire. Or paper clips Which is easy to find, teasing into the hole to bring the foam that is in the hole and then new into the injection tube. 4. If the foam that can be removed, kick the foam before bringing New assembled. Steel, cement work, construction work, decoration and general repair Both inside and outside the building- has a long service life- resistant to all weather conditions And can be painted.
Feature- Heat- COLD INSULATION.- Can With Stand Water, Oil, Acid.- Applicable to Aluminum Work, Steel, CONSTRUCTION, Decoration and General Repair Work and Outside. Long Service Life.- Withstands All Kinds of Weather Conditions and Can Be Painted.
Product Details- Material: Polyurethane / MATERIAL: Polyurethane-Package: 1 piece / Package: 1 Piece-injector: Type Injection tubes / nozzle: Injection Tube-capacity: 750 ml / can, 15 cans / box / capacity: 750 ml / can, 15 cans / box-period. Set: 12-15 minutes / Tack Free Time: 12- 15 minutes-full set: 1 day / Full Cure Time: 1 day-density: 17-22kg / m3
/ density: 17-22kg / m3
- water absorption: 0.5 g / 100cm2
/ Water absorption: 0.5 g/ 100cm2
- Storage life: 1 year. Touching the skin- if touching the skin Rinse with a large amount of clean water immediately.- Keep in the shade at a temperature of not more than 40 degrees.- Keep the children's hands- avoid exposure to sunlight. And direct heat. Children.- Avoid Exposure to Sun and Directly Heated.