UBODYOASIS, a mobile oxygen sprayer, USB, multi -function, Nano Spray Hydrator, Beauty Equipment in the house.

Specifications
Source: CN (Origin)
List type: Oxygen syringes
Functions: Skin rejuvenation
Functions: Skin Moisturizer
Functions: Skin tightening
Color: Gold/Black /Red/Pink
Material: Aluminum alloy
Voltage: 7.4V
Coordinates: 4.44W
Active voltage: 110V-220V
battery capacity: 800mah < BR> Charge Time: 3 hours
takes: 20-30 minutes.
Energy sources: USB cable
Weight: 285g
Size: 14.5*11.5*4.5 CM/5.7*4.5*1.8in

Lecture:
1. Covering skin care: 150kpa high pressure is used to clean the face, injection oxygen, add moisture. And recommend nutrients efficiently Protect the desired injections while not irritating or injury.
Fresh oxygen injection: Powerful spray can wash dirt that is buried tightly, oil and dead skin deeply in the pores. Allowing the skin to breathe freely pure oxygen and shine.
3. Nano-Mist Hydration: The water will be made into a droplets as a special small particles that are smaller than pores. Which can easily penetrate the deepest layer of the skin Which helps to quench a lot of thirst.
4. 100%imported nutrients: face mask, toner, essence ... can double the absorption of cosmetics and save the desired quantity Full spray spray can be done by only a few drops of water.
5. Make your life easier: manicure tattoos, make -up cakes ... are multi -function devices It can be used to paint anything you want in your daily life. Fun And more convenient.

Features:
1. High capacity battery: 800mAh battery.
Charging mode 2.USB: Can charge with a computer or battery through the USB data cable. Stainless steel with fine droplets.
3. Adjust button: There is a spray adjustment button which can be adjusted according to the needs.
4. Control the trigger: Press the trigger down and pull back slowly. To control the thickness of the line
5. Easy to carry: paint spraying tools, use less space and easy to carry and store
6. Material: made of aluminum alloy Stable structure And not easy to damage.
7. Large watering lotus, easy to add water and easy to clean.

Operation:
1. Install water guns and water tanks.
2. Add water in the water tank.
3. Rotate the button to adjust the spray level.
4. Ponder back to enjoy.

Warning:
1. Do not use this product while charging.
2. To avoid bacterial contamination Recommend to wash the product with warm water or alcohol before use.
3. Do not add any other cosmetics except liquid. High concentrated products must be diluted with mineral water.
4. To avoid the blockage of the nozzle After each spray, you should: ① pour the remaining liquid in the tank. ② Add water to inject (Until no water sprayed); ③ Splashing to make the tank dry completely.
5. Can only be used for melted pigment And should be cleaned in time after each use Otherwise it will be blocked.
6. Note: This model is a single engine. It is normal for the gun to spray the air when turning on the machine. The solution will spray only when you pull the spatula down and return. > 1*box

Note:
1. Due to self -measuring Please give 0-1 inch errors. Thank you for your understanding.
2. The screen does not have the same adjustment. The color of the product shown in the picture may be slightly different from the real thing.