JWKG Dash Cam Universal Car DVR สำหรับ Toyota / Chevrolet / Ford / Nissan / Kia / Hyundai ปรับมุมควบคุมโดย App สองกล้องตัวเลือก

caution:
If the car battery voltage is lower than 11.8V, the voltage protection device will cut off the current.
For a 24-hour parking monitor, the power cord is very important.Suitable for 80% of carsIt can fit 80% of cars without auto-dimming rearview mirrors or auto-sensing wipers,
Support adjusting the camera angle (up or down) to choose the best angle for your car,
Removable panel, easy to install and uninstall.Mobile phone download APP, mobile phone link machine WIFI, you can browse the recorded video online, download and watch more convenientSingle camera 1296P video, dual camera (front + rear) 1080P+720P video, full HD lens SONY IMX323 1 / 2.9 CMOS sensor, 140 degrees, F1.8, 4G glass camera, night vision is also clear
Daytime effect(the license plate has been covered by mosaic)Night effect (the license plate has been covered by mosaic)Power button: short press to lock/unlock files, long press to turn on/off WIFI
Camera button: short press to start/stop recording, long press for 3 seconds to take a photo
Microphone: After the microphone is turned on, there is sound in the recorded video
Indicator light: When WIFI is off, the blue light in standby mode is off and the red light is always on; the red light in video mode flashes. When WIFI is on, the red light and blue light in standby mode are always on; when WIFI is on, the blue light is always on in recording mode and the red light is blinking; when WIFI is on and the mobile phone APP is connected, the red light is always on and blue light is blinking in standby mode ; Video mode red light and blue light flash alternately
Reset button: restart the device when power is onDashcam Installation1.Follow the manual of your car or search the information from internet to find your carfuse box ,open the box with the plastic pry tool (if you have to use it ).2.Use the electro probe ,find the ACC power fuse and Constant power fuse ,werecommend you use reading lamps , headlights, tail lamps , turn signals, power windowsfuse to supply for the Constant power (if they are constant power fuse ).ACC power: When you plug your car key then turn it to ACC ,the power will work .if youturn your car Key to Lock or unplug your car ,the power will be off .Connect the red wire(ACC) with the ACC power fuse .Constant power ( BATT +12 V ) : plug or unplug your car key ,the power is uninterrupted .Connect theyellow wire ( B+ ) with the Constant Power fuse .3.For some cars ,you have to cut the wires , refit them then connect them with the carfuses .Then plug the fuse to where it is .The GND wire (black ) to connect it with steelplate or screw .4.Connect the car DVR with the wires ,then turn your car key to ACC ,test the car DVRcan work or not .Connect your smart phone with the car DVR via WiFi ,open the app asFinalCam to manipulate the car DVR and find the best installation position .5.Stick the car DVR on windshield by 3M glue ,then fix the wires ,finish theinstallation , feel at ease to useHow to use APP?After ensuring that the recorder is powered on, turn on the wireless LAN on the phone or tablet, and find the network "WIFI_DVR_XXXX (serial code)" corresponding to the recorder. The default password is 1234567890.After the WIFI connection is successful, click the installed APP to enter the APP main interface, click "camera" to enter the APP recording interface, the setting interface