PreSonus Eris E4.5 (Pair/ต่อคู่) 4.5" Powered Studio Monitor with Woven Composite Woofer รับประกันศูนย์ไทย 1 ปี

4.5-inch Kevlar low-frequency transducer
1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
Front-firing acoustic port for superior bass-frequency reproduction
Optimized, resonance-suppressing internal bracing
100 dB maximum continuous SPL
HF Driver Adjust (±6 dB, continuously variable)
Midrange Driver Adjust (±6 dB, continuously variable)
Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
Highpass filter (Off, 80 Hz, 100 Hz)
50 watt, Class AB biamplification
RF interference, output current limiting, over-temperature, transient, and subsonic protection
Amplifier “soft start” feature eliminates popping on power-up
Internal power supply with IEC connector
Power switch with on/off LED
Balanced ¼-inch TRS and unbalanced 1/8-inch TS, RCA inputs (E4.5)
1/8-inch stereo headphone output (E4.5)
ลำโพงห้องอัด PRESONUS ERIS E4.5 ACTIVE STUDIO MONITOR 4.5″
ลำโพงมอนิเตอร์สำหรับห้องบันทึกเสียง PreSonus Eris E4.5, มีกำลังขยายในตัว 25 วัตต์ Class AB Amplification per Side, ขนาดดอกลำโพง 4.5นิ้ว Kevlar Woofer Cone for Bass, เสียงแหลม 1 นิ้ว Silk Dome Tweeter, ตอบสนองความถี่ 70 Hz to 20 kHz, 1/8″ Stereo Headphone Output Included


Description
PreSonus Eris E4.5Hi-Definition 2-Way 4.5″ Nearfield Monitors
ลำโพงมอนิเตอร์สำหรับห้องบันทึกเสียง PreSonus Eris E4.5, มีกำลังขยายในตัว 25 วัตต์ Class AB Amplification per Side, ขนาดดอกลำโพง 4.5นิ้ว Kevlar Woofer Cone for Bass, เสียงแหลม 1 นิ้ว Silk Dome Tweeter, ตอบสนองความถี่ 70 Hz to 20 kHz, 1/8″ Stereo Headphone Output Included

The PreSonus Eris E4.5 Hi-Definition 2-Way 4.5″ Nearfield Monitors (Pair) are designed for recording studio tracking, mixing, and mastering. Each monitor features a 4.5″ Kevlar woofer for midrange and a 1″ silk dome tweeter for treble powered by a 25W class AB amplifier.

For inputs, the monitors accept balanced 1/4″ TRS, unbalanced 1/8″ TS, RCA and bare-wire inputs. The back panel of the monitors feature adjustment controls for fine tuning the monitors to your listening room. The controls include ±6 dB gain for the midrange and ±6 dB for the high frequency output.


A selectable high-pass filter with off, 80 Hz, and 100 Hz settings lets you listen with or without the bass, and an acoustic space setting with flat, -2 dB, and -4 dB settings lets you adjust the monitors for your room’s acoustic characteristics.

The cabinet uses resonance-suppressing internal bracing to optimize the sound output and the amplifiers include RF interference, output current limiting, over-temperature, transient, and subsonic protection circuits.