ไมโครโฟนสเตอริโอ MIC DC / DV เฉพาะพร้อมปลั๊กเสียง 3.5 มม. เข้ากันได้กับ Canon Nikon Digital Camera & Video Camcorder

เขียนรีวิว
฿900
Price in points: 900 point
12930135
In stock
+
Buy now with 1-click

รายละเอียด

Stereo MIC DC/DV Dedicated Microphone PL-MIC02
with 3.5mm Audio Plug for Canon Nikon Digital Camera & Video Camcorder
Features:1. The microphone can be used with digital cameras & video camcorders with 3.5mm MIC Jack, and can be used with the following cameras by hot shoe directly: Canon EOS 1DX III / 1D Mark II, 7DII / 6D II / 5D Mark IV / 5D Mark III, 90D / 80D / 70D / 800D / 750D / 700D; R6 / R5 / R1 / R / RP; Nikon D6 / D5 / D4S, D850 / D810 / D800 / D750 / D7200 / D5500 / D5300 / D3500 / D3300; Z7 II / Z7 / Z6 II / Z6 / Z5 / Z50; Sony a9 II / a9 / a7 IV / a7 III / a7s III / a7R III / a6600 / a6500 / a6400.

2. The stereo microphone uses two stereo electret capacitor pickups, two separate signal amplification circuits, and acoustic interference tube technology, have good sensitivity and high directivity, pickup effect of long-distance and excellent directivity can easily be obtained.

3. The stereo MIC uses multi-level signal amplification circuit and noise reduction circuit, the output impedance of 500 ohms, suitable for most cameras and camcorders; providing low-cut and sensitivity enhancements to meet the requirements of different occasions; low-cut can effectively reduce wind noise.

4. Using one AA battery, with excellent standby time, while providing a low voltage LED alerts; Metal materials cavity, not only lightweight, rugged, but also conducive to high-frequency sound filtering of electromagnetic waves and enhancement of high frequency sounds.

5. Unique removable rubber buffers can effectively reduce the noise caused by vibration, providing ± 30 ° tilt adjustment; cold foot using a large lock nut with built-in 1/4 " copper nut; High-density sponge, weaved signal cable and gold-plated audio output plug, can effectively reduce sound transmission noise.
Note:1. Low-cut design to reduce wind noise outdoors, but may reduce low frequency sound effects as well;

2. When sensitivity switch to +10 dB, it will enhance the sound effects, but may increase the noise as well;

3. When recording, please do not operate the switch or touch the microphone, do not move it vigorously, otherwise, the noise will be recorded;

4. When recording, keep the microphone switch vertical to the ground to ensure pickup heart-shaped for better sound effects;

5. When use and storage, please be careful to avoid wet, electrostatic, magnetic, hot or cold, which will affect the life of the product and the use effect.
Usage:1. Remove the microphone from the shock absorber, rotate and open the rear, install one AA-1.5V fully charged battery according to the positive and negative prompts;

2. Install the microphone back to the shock absorber, attach to the camera hot shoe and adjust the microphone length according to the length of the lens;

3. Insert the plug properly into MIC hole of camera or DV;

4. Turn on the microphone first, and then the camera / DV power, set in video mode to start work;

5. When recording, keep the microphone switch vertical to the ground, do not adjust the switch during working;

6. After use, turn off the power, remove the battery, store the microphone in a dry place under room temperature.
Specifications:Pickup type: Stereo electret capacitance x 2

Frequency response: 50Hz-16KHz

Sensitivity:-45dB

Enhance: +10 dB

Low-cut frequency: 60Hz 10dB (otc)

Output impedance: 500Ω (AT 1KHz)

SNR: 76dB

Maximum load SPL: 120dB

Battery type: AA battery

Cable length: 33cm

Plug: Gold-plated 3.5mm in diameter

Dimensions (excluding sponge): 200 x 42 x 65mm

Weight: about 120g
Package Including:1 x iShoot DC/DV Stereo Microphone PL-MIC02

(The other items in the photos not listed here are for illustrating only, not included)

รีวิว

ยังไม่มีรีวิว