Audioengine HD3 Wireless Speaker (Black/Black). Hi-Fi speaker connected via Bluetooth, Mini-Jack or RCA Outputs, Or USB Audio.

Write a review
฿16,900
Price in points: 16900 points
2046701
In stock
+

Description

Product Highlight
Small table speakers APTX ™ provides all districts. Outstanding bass guaranteed for Audioengine Center for 1 year. The picture of the exterior box of HD 3. When opened, the first thing found was the 2 gray velvet bags that put the cables inside. I'll open and see what the inside is free. Let's go see the real speaker first. And meet our hero speakers. HD3. Today, I took the Cherry color, which actually has a total of 3 colors, 2 colors, Walnut, Satin Black. The shape of the HD3 is like a computer speaker for a general table. The mask can be removed. By using a magnet as a attach to the speaker Same as the Audioengine B2 speaker. When the mask is removed, the Tweeter speaker will be seen on the top and the 2.75 "kevlar woofer. One side is active and the other side is passive. The active side speaker has a button for turning on the device and increasing-reducing the sound. And the right side has a 3.5 mm headphone jack, including buttons for connecting Bluetooth. It is another specialty that Audioengine put in for HD3. Asked why there must be a 3.5 channel when we can connect the headphones directly from the Player. The answer is that we can use the HD3 speaker as a headphone amp. Audioengine has put USB DAC support at 16bit (44.1khz/48khz) (24bit, UPSAPPING) inside. Makes it possible to bring your heart headphones and listen to the HI -RS level immediately. Oh! Really full. But there are still more Let's continue to see. The back of the active speaker will have various connectors. What are the connections? Let's see. Input and Output channel RCA input channel Mini Jack 3.5 mm, USB Input, Mini USB, cut button. Bass When you want to connect the subwoofer separately, you can adjust the HD3 bass to remove the word Reduced for use with subwoofer. Power slots to connect to the other side of the speaker. The Banana Connector. (Pillars can be removed). The matter of the Bluetooth signal that many people are worried about the drops. Audioengine HD3 will have the DAC sequel in the PCM5102 chip. Supports high quality music files at 24bit UPSAMPLING with a system. APTX® also enters the audio signal as well as CD, and the rear connection pole Resulting in a 30 -meter -distance receiving distance, which can be said to be almost as far as the front of the house To the front of the alley, the house is quite good. Let's see the line. Audionengine. Plus, it is almost complete. The first one. Power and Power Adapter, size 17.5 V/ 1.8 A at this point, I noticed. See one thing Is the end of the cable that is plugged into the speaker There was a system to protect the cable while using it. When we plugged in If wanting to pull the cable out, press the black button before pulling out. Which is very good Sometimes while we are listening to music There is a movement and may cause the cable to come off when listening. Which will cause the speaker to follow This will help solve the problem in this section very well. Connect the speaker on both sides to the banana connector head. The cable is covered with rubber in order to prevent the deterioration of the cable. The logo pump onto the line makes it look simple but very luxurious. Let's talk about the sound for the Audioengine HD3 speaker. After I unpack the box and listen. Which has not been burns the speaker The first time I felt that ... is this a 3 -inch table speaker?! The sound is good, the middle voice is very clear. The bass comes as a child. There is no more impact. Good children As for the treble, it is well done as well. Sparkling tip, not scarce the ears. Soundstage is not very wide. Which is suitable for all genres But personally, I really like this speaker when listening to music Pop/Jazz/Fusion Listen and hear the details clearly. Summary of the Audioengine HD3 speaker is a desktop speaker. And can also connect in many forms, whether 3.5 input, USB, Bluetooth or RCA, which is quite complete. For those who like to watch movies, listen to music Can be used with computers or Smartphone, it is well done, easy to carry, compact But full of sound quality It is very worthwhile for speakers for 16,900 baht. If you try it, you will be very fascinated. Featuresbuilt-in Power Amplifiers
High-Fidelity Bluetooth® with Aptx®, Extended Range and Simplified Setup
USB Audio Input
Dual Analog Audio Inputs and A Full-Range Variable Output
Custom Kevlar Woofers and Silk Tweeters > Threadd Brass Inserts To Secure Speakers to Floorestandswhat's in the Boxhd3 Powered (Left) Speaker
HD3 Passive (Right) Speaker

Speaker Wire (16awg), 2 METERE (~ 6.5 Feet)
Power
AC POWER Cable
Mini-Jack Audio Cable, 1.5 Meters (~ 5 Feet)
USB Cable, 1.5 Meters (~ 5 Feet)
Microfiber Speaker Bags Bag
Quickstart Guide
Product Line Brochuredimensions (Each)
7 "(H) x 4.25" (W) x 5.5 "Weight (Left Speaker)
1.8KG/4LBSWEIGHT (Right Speaker )
1.5kg/3.4lbsshippping weight

Reviews

No reviews found