Weber, fiber tape, 100 -five fiber mesh For waterproofing on the roof Light boundary on the wall

Weber, fiber tape 100, made from good glass fibers Used as a material to help strengthen and add adhesion to the waterproofing material to the surface better. Can be applied to a variety of work, such as using the waterproofing system. Used to increase the strength of the light sheet before making a skim coat. Both inside and outside.



Used to strengthen For every type of waterproofing
can be used for skim coats To strengthen the skim coat Light wall boundaries.
Hit the impact and help reduce cracking. Can support a lot of tensile strength. : White

Channel: 3 x 3 mm (8.5 x 8.5 per square meter)

Weight: 50 grams per square meter (5 kilograms per roll)

Installation with waterproofing

- Clean the surface that will be installed, clean, free from dust, debris and various stains. BR>
• The water is to be absorbed until saturated. Not too wet Before making cement waterproofing, such as webords ,tech, or webboard, top. Dry Seal 1, 4 parts of water, can be used as a foundation on the cement surface).

- Apply the 1st floor. Then laying the net to strengthen the fiber tape 100, into the waterproofing texture.
And let the net buried in the waterproofing meat.

- Let the first layer dry. According to the specified time of each type of water, then the second round is overlapping until the net did not And the thickness as specified by the manufacturer. To reduce cracking Caused by the movement of the sheet or expansion Or contraction of this type of sheet When receiving moisture or changing temperature. Should be except for at least 5 mm. Fill the seam, dry completely. Coats or Weber Best Skim, Ultra Bond, at the joints of the sheet Light walls to have a wider area than the Weber, Tape, fiber 100, cut. Giving the marks of the wall light Located in the center of the Weber Tape, fiber 100.

- Use the mesh to attach to the skim coat. No wrinkles.

- Leave the skim coat. Before the next round Until not seeing the joints or The net

- After the skim coat is completely dry. Scrub the skin with sandpaper.

Lifesp And storage.


2 years from the production date By keeping the tape not wrinkled And is stored in the shade, dry, not moist, convenient to ventilate